Process: Open width entry unit→Tension control frame→Infrared center guider→3roller padder→Lower overfeeding screw expending →Upper overfeeding→photocell edge guider & Four-finger edge uncurler device→ Pinning-on→Steaming & edge gumming device →6-12 Chambers for heat setting→Air cooling→Pinning-off→End section→ Plaiter
Entry track is 6 meters long.
1) Also with four-finger uncurler device which suitable for warp knits.
2) All bearings for chains filled with imported high temperature grease.
3) Pins are Monforts type, with non-lubrication chain.
4) Driving system A.C frequency variable synchronous drives system control by inverters.
5) Head with touch screen system. all the chambers temperature displayed on controller.
6) Control panel equipped the air conditioner to maintain the certain temperature for electronics components.
7) Each chamber has individual temperature controller.
8) 2 motors in chamber and each motor of 5.5 Kw.
9) Air cooling system.
10) Double drive system, 11Kw each.
11) 2 exhaust fans. 5.5Kw each. inverter controlled.
12) Delivery unit: Plaiter at exit with anti-static device.
2-rollers Padder:
1) Width of the Rollers: 1800-3600 mm.
2) Diameter of the Rollers: Φ400mm
3) Specific pressure: 15 Kg/cms.
4) Total squeezing power up to:10,000 Kg (10 Tons).
5) NBR Rubber covering of driven roller: 95 Shore.
6) NBR Rubber covering of free roller: 85 Shore.
7) No. of expending roller:2 x Pcs.
8) Capacity of the motor: 11 K.W.
9) Mechanical pans for obtaining the rotation and the movement of the rollers made with cylindrical and shifting supports.
Entry track is 6 meters long.
1) Also with four-finger uncurler device which suitable for warp knits.
2) All bearings for chains filled with imported high temperature grease.
3) Pins are Monforts type, with non-lubrication chain.
4) Driving system A.C frequency variable synchronous drives system control by inverters.
5) Head with touch screen system. all the chambers temperature displayed on controller.
6) Control panel equipped the air conditioner to maintain the certain temperature for electronics components.
7) Each chamber has individual temperature controller.
8) 2 motors in chamber and each motor of 5.5 Kw.
9) Air cooling system.
10) Double drive system, 11Kw each.
11) 2 exhaust fans. 5.5Kw each. inverter controlled.
12) Delivery unit: Plaiter at exit with anti-static device.
2-rollers Padder:
1) Width of the Rollers: 1800-3600 mm.
2) Diameter of the Rollers: Φ400mm
3) Specific pressure: 15 Kg/cms.
4) Total squeezing power up to:10,000 Kg (10 Tons).
5) NBR Rubber covering of driven roller: 95 Shore.
6) NBR Rubber covering of free roller: 85 Shore.
7) No. of expending roller:2 x Pcs.
8) Capacity of the motor: 11 K.W.
9) Mechanical pans for obtaining the rotation and the movement of the rollers made with cylindrical and shifting supports.
){kind=link}